2. Impulse Voltage Generator Impulse voltage generators are used for conducting lightning impulse tests on electric cables, capacitors, bushings, power transformers and instrument transformers. They can carry out standing lightning full wave impulse tests, chopping wave impulse tests and standard operation wave impulse tests.
    2. Partial Discharge Test System The partial discharge test system is special to measure partial discharge of transformers, motors, cables, GIS, switches, arresters and others. It has special dual-channel measuring function which allows to make several tests to different items or several tests to different points on same item, it's also suitable to analyze discharging positions of big size transformers.
    2. Capacitance and Dissipation Factor Meter This capacitance and dissipation factor meter is an up-to-date test instrument for measuring capacitance and dissipation factor (dielectric loss and impedance) for full automatically voltage devices such as transformers, cables, capacitors, insulators, HV switches, arresters, etc.
    2. Transformer Loss Tester The transformer loss tester has a high precision integrated test instrument, not only for checking out transformer capacity, but also for testing transformer performance such as no-load current, no-load loss, short-circuit voltage, short-circuit loss, impedance voltage, etc.
    2. Transformer Test System Transformer test system is an integrated test bench, combined with several test instruments and equipment for a variety of routine tests on transformers. It can provide reliable data for supervising and manufacturing distribution and power transformers.
    2. Cable Hipot Test System The cable hipot test system includes frequency power, exciting transformer, reactors and voltage divider. Reactors are dry resin casting type, suitable for different cable tests. Variable-frequency resonance voltage raising device makes reactor and capacitor achieve resonance by adjusting frequency of power and getting high voltage and big current on tested objects.
    2. Instrument Transformer Test Sets The instrument transformer test sets is a full automatic microprocessor-based integrated test set. It can perform tests of current transformers and potential transformers, such as excitation, ratio, winding polarity, ratio and phase angle error, etc.
    2. Arrester Tester The arrester tester checks AC electrical parameters of zinc oxide arresters, perfect instrument for both worksite and laboratory testing. It adopts advanced microcomputer as main control, full intelligent operation and strong anti-jamming ability for high precision measuring results.
    2. Power Quality Analyzer The power quality analyzer helps to locate, predict, prevent and troubleshoot problems in power distribution systems. It is featured with big size memory, suitable for long-time analyzing and collecting data of power grid; its software analyzes data collected and uploaded into PC.
    2. Transformer Oil Vacuum Filtering Machine This series transformer oil vacuum filtering machine is a kind of typical double-stage vacuum oil purifiers and can process and recycle transformer oils efficiently under vacuum conditions. It is capable of dehydrating, degassing, as well as purifying various insulation oil utilized for high voltage transformers, circuit breakers, etc.
    2. Protective Relay Tester The protective relay tester is an important testing tool that ensures power system is running securely and reliably. JB series protective relay testers are computer-based, true color LCD graphic display and WOS, Windows operation system. It is compact, portable and light weight, 16Kg to 18Kg.
    2. EHV Circuit Breaker Analyzer The EHV circuit breaker KC-6A analyzer is standalone; it has a microprocessor-controlled, 6 dry contacts, analyzing extra high voltage circuit breaker's performance by testing contact time, stroke, speed and over-travel, etc.
    2. Vacuum Bottle Tester Different to conventional power-frequency withstand voltage test method, the vacuum bottle tester adopts ionization charges sampling technology, quantitatively testing vacuity of vacuum bottles, evaluating if vacuum bottle in circuit breaker is in normal range and calculating vacuum switch life with fast leaking.
    2. Cable Fault Locating System Cable fault locating & detecting involves a complete system, instead of a single tester. We offer different configurations of cable fault locator systems for underground and overhead cables. These are also available in different voltage levels, ranging from 380V to 220kV, and even 500kV.
    2. Battery Making Machine This machine is specially designed for casting board and grids used in batteries. It can melt lead, keep constant mould temperature, feed certain lead liquid, cast and trim edge, all in one machine.
    2. Transformer Coil Winding Machine

      We have a variety of coil winding machines for distribution transformers and power transformers available:
      LV coil winding machine
      HV coil winding machine with automatic wire guiding device
      Fully automatic coil winding machine with auto insulation winding
      Fully automatic multiple coil winding machine
      Vertical coil winding machine for power transformer

    2. LV Foil Coil Winding Machine We have both LV foil coil winding machines and HV foil coil winding machines available for dry transformers and high quality oil immersed transformers. The LV foil coil winding machine is available in 800mm, 1100mm and 1400mm width, single-layer or double-layer.
      Our HV foil coil winding machine is specially designed for high voltage foil coils, high automation, and high precision.
    2. Transformer Turns Ratio Meter High turns ratio range: 1-10,000
      Built-in large-size thermal printer.
      Phase angle and winding polarity measuring.
      Name-plate turns ratio calculation.
    2. Wheel Rim Bending Machine We can provide all the related machines for producing wheel rims, such as rim bending machine, rim butt welding machine, rim trimming machine, rim rolling machine, and so on.
    2. Busbar Bending Punching Cutting Machine This machine integrates the functions of punching, cutting and bending, embossing, twisting, flatting, pressing tie-in, etc. Our busbar bending punching cutting machine is specially produced to process aluminum and copper busbars used in electric power, high/low voltage electric apparatus and busway industries.
    2. Vacuum Impregnation Equipment Our vacuum impregnation equipment is mainly designed for insulation treatment of electrical products including wind turbines, power capacitor, high voltage motor, H-grade dry transformer, as well as cable insulation materials, and so on.
    2. Micro-Ohmmeter The HL series for micro-ohmmeter measures circuit-breaker contact resistance, bushing contact joints or any low-resistance conductor path that requires testing. This microprocessor controlled micro-ohm meter can accurately measure low resistances ranging from 1 micro-ohm to 20 milliohms at any test current from 10A to 600A.
    2. CTC Production Line Our CTC production line is able to produce the continuous transposed conductors used in huge transformer windings with voltage of less than 1000MVA and 1000KV. This device is capable of stranding many flat copper wires together. It, through accurate mechanical actions of transposing head ...
    2. APG Epoxy Resin Casting Machine Our WHAG-888 APG Epoxy Resin Casting Machine adopts the automatic pressure gelation processing technology. It is used to cast high voltage electrical components with epoxy resin. The APG technology can reduce the casting duration from dozen hours (by conventional vacuum casting method) to dozen minutes.
    2. 3D Panel Welding Machine This 3D panel welding machine is used to produce structural reinforced concrete panel, also called "3-D" panel. This three-dimensional panel usually adopts 50mm thick uninflammable polystyrene panel as core. One side or both sides of the panel are covered with steel wire welded mesh.
    2. Corrugated Tank Machine

      We have a complete range of machines for making transformer corrugated tanks:  
      1- Transformer corrugated tank fin forming machine
      2- Transformer corrugated tank fin welding machine
      3- Corrugated fin reinforcement spot welding machine
      4- Corrugated fin wall bending machine
      5- Powder coating line

    2. SF6 Analyzing Meter The SF6 Analyzing Meter is a modern instrument, measuring moisture content in hydrogen, nitrogen, other inert gases and non-corrosive gases, especially SF6 gas, in high precision. It's used in SF6 switches distribution station, hydrogen station and hydrogen-cooling generators, also used in petrochemical and metallurgical industry, environmental protection industry, scientific research institutes and other fields.
    2. Transformer Core Cutting Machines We have various transformer core cutting machines available:
      Fully automatic CNC step-lap mitred core cut to length line (GEORG like)
      Compact swing shear step-lap mitred core cut to length line
      Distributed gap core cutting machine (UNICORE like)
      High speed electrical silicon steel rectangular / straight cutting machine